Control Terms
Home Up surplus Control Terms CompuDAS HeadsUp

 

 

Acronyms and Control Terms

 

TERM

 

DEF BY 

DEFINITION

 

 

 

 

 

 

 

10BaseT

Generic

LAN Interface connector and hardware signal definition

2BaseT

Generic

Coaxial Ethernet LAN running at 8 mB/s

ADSL

Telco

Asymmetrical Digital Subscriber Line, telephone
Receive data rate is higher than transmission rate.

CR

Generic

Control Room

DCS

Controls

Distributed Control System  The autoclaves use lots of small computers and programmable devices instead of one large computer.

DIN

Generic

European set of standards for connectors, equipment, and devices

DSL

Telco

High speed digital telephone line available in a few areas and within a limited distance of a telephone company switch.  Less $ than IDSN

EIC

AeroSoft

Event Initiated Control batch recipe control system

Ethernet

Generic

Hardware & low level layer protocol for a LCN

EV

Control

Electric Valve, is a MOV

HMI

Generic

Human Machine Interface refers to hardware and software graphic application, also known as MMI, Man Machine Interface.

ICD

all

Interface Control Document

IE

Microsoft

Internet Explorer, a browser for data access on the Internet or an Intranet

ISDN

Telco

Telephone line with analog voice and high speed data; limited availability.

IT-LAN

AeroSoft

Information Technology LAN.  The LAN between the PCPC and the Server  &Remote HMIs.

LCN

Generic

Local Control Network; this may be a Process Network connecting to real I/O or a facility wide network.

LPN

AeroSoft

The LAN that connects to the UUC and is limited to process control

MMI

Generic

Man Machine Interface

MOV

Control

Motor Operated Valve, open or closed

MOV

Electronic

Metal Oxide Varister, i.e. Transient Absorber or "Spike Suppressor" (Note: these will pass nanosecond spikes of 1kv amplitude.  See Snubber).

PC-LAN

AeroSoft

Process Control LAN.  The LAN between the PCPC and the I/O at the process under control.  Typically only the PCPC and I/O are on this cable.  A redundant PCPC may be put on this cable.

PCPC

AeroSoft

Process Control Personal Computer.  Typically the lowest level programmable device, located at the major process under control.

PCV

Control

Pneumatic Operated Valve, variable

PFOD

all

Process Functional Operation Description

Phase

Control

A numeric register that is used to present a message to the operator during execution of the Control Schedule. 

PID

Generic

Proportional, Integral, Derivative

PLC

GENERIC

Programmable Logic Controller,

POTS

Telco

Plain Old Telephone Service; usually dialup and <56kb

PU

Hw

Processing Units The allocation of point and computing resources in the PM and LM.  Defined and allocated differently in both places.

PV

generic

Process Variable  This is the measure of the process, e.g. temp or press or vacuum

RECIPE

Control

The list of steps that change temperature, pressure and vacuum to cook the parts. 

Snubber Electronic A circuit component consisting of a resistor and capacitor in series that is placed across the coil of a relay or solenoid.  This component dissipates transient pulse power and can be more effective than a MOV in noise suppression.

T1

Telco

A 1mb/second high speed telephone line

TDC 3000

HW

Honeywell's DCS "Total Distributed Control"; these are the control consoles and related equipment.

Telco

Generic

The telephone company

TLA

Hw

Three Letter Acronym

Trend

HMI

A graphical historical representation of data

UAIM

Hw

Universal Analog Input Module

UCN

Hw

Universal Control Network

UUC

Generic

Unit Under Control

WDT

Generic

Watch Dog Timer

Windows 2000

Microsoft

Operating system based on NT but with user interface of 98

Windows 98

Microsoft

Operating system for single user with limited security

Windows CE

Microsoft

Operating system dedicated to portable and small applications

Windows NT

Microsoft

Operating system multi-user and multitasking with extensive security